Data sheet updated in October 2026
The North Front Surfpads Standard with Mini Pads is North Kiteboarding's front pad for surfkite and surfboards. It comes in two main pieces, plus two mini pads. This pad covers the front of your deck, letting you ride without wax. The two larger pieces go on either side of your board's centerline. Then, you can add the two mini pads exactly where your front foot needs extra grip: at the heel, along the rail, or in the transition zone. It features diamond-patterned EVA foam for solid grip and 3M adhesive for long-lasting hold.
KEY INFORMATION
NORTH FRONT SURFPADS STANDARD WITH MINI PADS - Front Surfkite Pad
What we like
- Two mini pads: You can adjust the grip surface to your foot position, not the other way around.
- Diamond relief: Your foot grips even when wet, and it won't be abrasive on your wetsuit.
- 3M adhesive: Once you apply it properly to a degreased deck, it stays put.
- No more wax: Forget re-waxing, and no more sand sticking to the front of your board.
- Free placement: With two independent pieces, you can spread them out or bring them closer together to match your board's shape.
Use
S • u • r • f • k • i • t • e • , • • s • u • r • f
Available sizes
Color
Light grey and dark grey
Included / Not included
✔️ Included: Two front pad pieces, Two mini pads
❌ Not included: Rear pad, Board
DETAILED DESCRIPTION
A Modular Front Pad
Most front pads come as a single piece. North Kiteboarding, however, gives you two large pieces and two mini pads. You can position the main pieces to fit your board's width, then add a mini pad exactly where your front foot needs extra support. For narrower surfkites, often just one mini pad is all you need.
Grip Without the Rub
The diamond pattern delivers solid grip underfoot, even in cold water when you're wearing boots. The EVA foam stays soft enough that it won't wear out your wetsuit at the knees when you're getting back on the board.
A Lasting Installation
For the 3M adhesive to work best, your deck needs to be clean, dry, and degreased. Position the pads dry first, then gradually peel off the film and press firmly from the center outwards. Let it cure for 24 hours before your first session to ensure the glue sets properly.
Which Board Is It For?
While it's primarily for surfkites, this pad also works great on classic surfboards or foil surfboards where you want front deck coverage. It pairs perfectly with any rear pad, whether it's North or another brand.
TECHNICAL SPECIFICATIONS
| Specifications | |
|---|---|
| Brand | North Kiteboarding |
| Product Code | 44600-8007 |
| Type | Front surfkite pad, two parts + two mini pads |
| Material | EVA foam, diamond pattern |
| Attachment | 3M adhesive, direct application to the deck |
| Color | Light grey and dark grey |
FAQ - NORTH FRONT SURFPADS STANDARD WITH MINI PADS
This is for riders who use a surfkite or a surf without wax. They want a clear grip under the front foot. The mini pads let you adapt the pad to your stance instead of being stuck with a single-piece pad.
Place it on a clean deck that you have degreased with alcohol. Position the pieces without removing the film, mark their spots, then stick them by pressing firmly. Wait 24 hours before getting the board wet.
Yes. This is a universal front pad. Nothing requires a surfkite. You can also install it on a surf or a foil board.
We have it in stock in Nantes. We have already installed it on our boards. We can tell you where to put the mini pads if you are unsure. We offer fast shipping, and in-store pickup is available.
▶ Need advice?
GlissEvolution, 2c avenue du Gulfstream, 44380 Pornichet (Loire-Atlantique)
09 62 64 74 77 | WhatsApp: 07 83 28 39 94, Tuesday to Saturday, 10am-1pm / 3pm-7pm
Test center available by appointment
Customer reviews
Loading reviews...
