Want to eFoil without the battery harness on your back? The DUOTONE CRUISE BATTERY BOX MOUNTING SET moves the battery box to the Midfish Air's rear deck. This means no more cable between your legs, a much simpler start for beginners, and direct access to the battery between sessions.
KEY INFORMATION
Duotone Cruise Battery Box Mounting Set 2026, battery mounting kit for Midfish Air
What we like
- Ride without a battery harness: The weight shifts to the board, freeing your back and shoulders for the entire session.
- Easier start: Getting on the board, kneeling, and then standing up becomes much simpler without a battery box or cable between your legs.
- Accessible battery: The raised box at the back can be handled while standing in the water, so you don't have to return to shore.
- Remote antenna: The antenna wire runs through the board's nose to maintain a stable connection with the remote.
- Mounting in minutes: This kit includes a plate, Velcro straps, and reusable clamps, requiring no specific tools.
Size
One size
Use
Designed for cruising eFoil on flat water. Not intended for surf foil, downwind, or wake foil.
Level
Ideal for beginner to advanced riders, and particularly recommended for learning.
Included
✓ Included: mounting plate and straps, battery box with antenna socket and neoprene bag, antenna wire and stopper cuff (+ 1 spare), short power cable, reusable clamps.
DETAILED DESCRIPTION
Battery on the board, not on your back
In its standard configuration, the Duotone eFoil is ridden with the battery housed in the eHarness worn at the waist. While effective for committed riding, this adds weight to your body and involves a cable running between your legs. This kit changes that dynamic: the battery is fixed to the Midfish Air's rear deck, connected to the mast by a short cable. This frees up the rider's movement, making the equipment much more welcoming, especially for your first session.
Significantly simpler learning
The most delicate phase in eFoiling is transitioning from lying down or kneeling to standing. Without a waist-mounted box or a cable to manage, this moment becomes much more natural: you simply climb onto the board, get settled, and stand up. The raised box at the back also remains accessible from the water, allowing you to switch off or reconnect without returning to shore.
Remote antenna and assembly
The box integrates the remote control's radio receiver. To maintain a stable connection once the battery is placed at the back, the kit provides an antenna wire that runs through the board's nose, complete with its stopper cuff and a spare. The entire assembly takes just a few minutes: simply attach the mounting plate with Velcro straps to the deck, connect the short power cable to the mast, and use the reusable clamps to neatly route the wiring.
Who is it for, and what is it used for?
This kit is designed for the inflatable Duotone Midfish Air and for relaxed cruising on flat water. It is not intended for surf foil, downwind, or wake foil, where the battery must remain on the rider. It is used with the Foil Cruise mast or the eMast Cruise Set, the eRemote Watch Ring remote, the charger, and Duotone battery packs. If you have any doubts about your setup, give us a call: we'll check compatibility with your set before you order.
VIDEO
FAQ - DUOTONE CRUISE BATTERY BOX MOUNTING SET
Only on the Duotone Midfish Air, the inflatable board in the range. The mounting plate and antenna routing are sized for this model.
Exactly! The whole point is that the battery moves to your board, freeing you from a battery harness and any cables between your legs.
You'll get the mounting plate with its straps, the battery box with an antenna socket and neoprene bag, the antenna wire with a stopper cuff (plus a spare), a short power cable, and reusable cable ties.
No, this kit includes the housing and its mounting hardware. Duotone battery packs and the charger are ordered separately.
We don't recommend it. This kit is designed for cruising on flat water. For Surf, downwind, or wake foiling, the battery should remain on the rider via the eHarness.
Not at all! It only takes a few minutes: simply attach the plate and straps to the deck, feed the antenna wire through the nose, connect the short cable, and use the clamps to secure everything in place.
Need advice?
GlissEvolution, 2c avenue du Gulf Stream, 44380 Pornichet (Loire-Atlantique)
Tel: 09 62 64 74 77, Tuesday to Saturday, 10am-1pm / 3pm-7pm
Test center available by appointment
To go further
Customer reviews
Loading reviews...





